-
topsites
Subscribe in a reader
04
Welcome to Gamingnewslink.com ’s – Solutions and Fixes for Batman Arkham Asylim PC errors, crashes, installation errors and freezes.
If you are encountering Batman Arkham Asylum related problems that are not listed below, please post them in the comments box at the bottom of this page. Posting solutions (working or speculated ones) for Arkham Asylum on the comment box would be more than welcome.
Before moving on, make sure that your pc meets Batman Arkham Asylum’s minimum system requirements (or better yet, exceed the recommended system specs)
Batman Arkham Asylum System requirements
OPERATING SYSTEM: Microsoft Windows XP or Vista
CPU: Intel Pentium 4 3GHz or AMD Athlon 64 3500+
RAM: 1GB for Windows XP 2GB for Windows Vista
GRAPHICS: nVidia 6600 or ATI 1300
SOUND: Microsoft Windows XP/Vista compatible sound card (100% DirectX 9.0c -compatible)
DVD-ROM: Quad-speed (4x) DVD-ROM drive
HARD DRIVE: 9GB free disk space
Batman Arkham Asylum Recommended System Specs
OPERATING SYSTEM: Microsoft Windows XP or Vista
CPU: Core 2 Duo E6600 (2.4Ghz) or Athlon 64 X2 4600+
RAM: 2GB for Windows XP 3GB for Windows Vista
GRAPHICS: nVidia 9800GTX or ATI 3870
SOUND: Microsoft Windows XP/Vista compatible sound card (100% DirectX 9.0c -compatible)
DVD-ROM: Quad-speed (4x) DVD-ROM drive
– List of Batman Arkham Asylum Errors and solutions –
Problem #1 : Physx is disabled in Batman Arkham Asylum (How to Enable Batman Arkham Asylum Physx)
Solution : (posted on filenetworks)
If the option to turn on PhysX is missing from the in game menu, try the following.
1. Browse to directory C:\Users\USERNAME\Documents\Eidos\Batman Arkham Asylum\BmGame\Config
2. Open UserEngine.ini file with a text editor such as Notepad.
3. Change the line PhysXLevel=0 so that it reads PhysXLevel=1
4. Save and close the file. Run the game
Problem #2 : Enabling Physx causes Batman Arkham Asylum to crash
Solution :
A. ) Make sure that you have a card capable of rendering Physx effect or a dedicated Physx card when you enable Physx. If it is enabled and you have the Physx option enabled, disable it by reversing the method posted in Problem #1
B. ) If you have a Physx capable card, make sure you update your video card drivers.
Issue and solution #3 : (posted on filenetworks)
well another problem. (i think) when you get to the point at arkham north at the point where you need to batclaw the upper access point and enter the mansion, there is no mark for the grapple. i found that the mark is misplaced. it’s marked towards the entrance to the island, and when you press it, it just grapple you all the way to the other side and thru the the walls and than you just falls off the map and come back at the other side of the island. and it’s always like this. either it’s me (i doubt it) or it’s another hidden protection trigger.”
Solution
Problem #4 : Batman Arkham Asylum error “Microsoft .Net Framework
Unhandled exception occured in your application.
Value was either too large or too small for an Int32.”
Solution :
A.) Update your .Net framework. Go to system update then tick the .net framework related releases then update.
B. ) For Windows 7 users or those users who can’t update via Window’s built-in system update, you might want to try http://www.microsoft.com/downloads/details.aspx?familyid=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en
Problem #5 : No in-game sounds but sounds play in cutscenes and intro (posted by Mania)
Solution : (posted by Mania)
Turn down (or turn off) Directsound Acceleration
Problem #6 :
Solution :
—- end of Batman Arkham Asylum list of errors —-
If you have problems or solutions regarding Batman Arkham Asylum that are not posted above, feel free to post about it in the comments box below. Some solutions may have been posted in the comment box below so feel free to use the native page text-search tool of your browser to aide you in looking for solutions for your Batman Arkham Asylum errors (Ctrl-F)
Related posts:
No related posts.
The demo works for me, but there is no sound. there are sounds in the intro vids, ads and cutscenes but when the game starts, nothing plays
found the fix. turning off directsound acceleration fixed it for me
i have problems with Batman Arkham Asylum the batman can not throw the rop in some palces that i must go in it I need help
My game crashes after batman see his parents in body bags and in the third bodybag he see the scarecrow and after the room changes game just kicks me out. What is the problem?
after i installed the game and opened it ,it gives me “fingerprint error 0″ any ideas??
Hi,
When I installing Batman Arkham Asylum(BAA) through BAA Installation Wizard, I interrupted the install. So I tried to uninstall BAA, uninstall was not successful. So, deleted BAA from registry and deleted the installed files.
Now, when I try to re-install BAA, I don’t get the Install Game option highlighted in the BAA installation wizard. So not able to install game. I have cleaned the registry using ‘Registrt Aid’ and ‘Ccleaner’, still not able to install.
Need your assistance in installing BAA.
I’m encountering a rather nasty bug right now where the graphics are really glitchy. Randomly, various parts of the game can be seen through, leading to headless or bodyless people, see-through floors, and lately, completely invisible people (A real pain since I’m at a boss right now, can’t even see him.)
I’m about to try the 1.1 patch to see if that fixes it. It should also be noted that my CPU is just barely under the minimum requirements, but I can still run the game fine otherwise, as long as the game is the only thing running.
Hallo, well same problem. fingerprint error. what the hell is this and how can be fixed or where can we download a crack that will do the trick?
Hi guys,
I installed the game with no problems. I started the game, eveything is fiine, I installed the 1.1 patch and latest PhysX drivers.
The game runs well untill the X Ray Lab.
When you have to blow up the 2 walls to save the doc.
The game crashes when I go too close from any wall.
It’s kind of spectacular! Black screen, then blue screen with some stuff written that I don’t have time to read, and then it restarts the computer.
This crash happened to me dozens of times, anywher I am in the room.
I have a Core2duo E6300@2.4Ghz
4 gigs DDR
Ge Force 8800 GTS 512mo.
Sound Blaster
Windows XP sp3
DirectX 9c
PhysX is set to normal, I also tried with PhysX disabled but it still crashes.
Any ideas?
Thank you very much,
Brandon
i have just bought Batman:Arkham Asylum (collector’s edition) and i have problem with the game’s installation. In the Autorun screen card the button Install Game is not active.In addition, when i push the button Game Setup there is a message which says “autorun-the specified file was not found”. I hope you may understand my problem. I am sorry for my english, i am greek. If you need something else as information please ask me. Thank you in advance for your support
wont even start, i keep getting a ‘Failed to initialise nvidia physx. please install the latest Nvidia physx system software.’
i have uninstalled and installed the latest drivers 3 times. i have opt165 dual core win xp, 8800gt sli. 2g ram.
i have tried with and without sli, phys x etc, keep getting the same error msg as above…
I was playing game.At some points of game grappling corsair didn’t appear and when I’m trying to find some solutions I deleted game a couple of times and delete_reinstall my gpu drivers.NOw when I click to start it crashes to blue screen pls help
Problem: If Batman isn’t moving (walking/running/gliding), the camera (controlled by the mouse) moves incredibly slowly, as though the sensitivty for the mouse has been set to 1. When he is moving (specifically, when I’m holding one of the WASD movement keys; the camera doesn’t work properly if he’s moving by way of a non-movement-related animation like punching), the camera moves fine, nice and quick. It hasn’t been this way the entire time I’ve been playing; it started when I fired the game up this morning. Until then, the mouse would move the camera with fine quickness around Batman.
Weird: I restarted and the problem resolved itself. Oh well, I guess the easiest solution is often the best solution! Good luck to everyone on resolving their issues; it’s truly a game to be enjoyed.
@Brandon
I am having the exact same problem. I have the same spec as you except for 2Gb RAM and I’m using onboard (Realtek) sound.
i have problems, the batman can not throw the rop in some places that i must go in it
I cannot install either the full game or the demo on Vista x64. The install crashes with an error 0×80040707. “DLL function call crashed: ISRT._CtrlSetMLERichText
batman arkham asylum starting error failed to initialise nvidia physx install the latest nvidia physx system software
i have installed latest nvidia driver but it still shows same error i have nvidia geforce 8400 gs graphic card
when i Play challenge mode, and if I restart the challenge from pause menu too many times…I’ll be kicked out from desktop…~~
any solution…
I have updated it to the latest version
Batman Arkham Asylum Errors, Crashes, Freezes and Shit’s it self!
When im done walking trough the intro sequence, and the game is about to start. There comes a small bat as an indication that the game is loading.
And there the game just freezes, i’ve actually tryed waiting for like 30 min. But nothing happend, but the bat is still turning as the indication of it loading.
Dont know if its a freeze or something else, but i cant seem to find any solution to the problem. I’ve tried the no intro patch, but that didnt work either.
I hope someone has an answer to this problem.
“seculauncher:failed to start application . [9000]” i get this kinda error plz help
hi i have reached 50% in batman arkham asylum but when i wanted to enter the botanical gardens there is something like a hidden wall prevents me from entering. is there any solutions? please…
i have problem in saving the game
Hello. Bought the game last Sunday. I tried installing it and it would do fine until the part where it says it needs to install additional software. It just stops. I have to do system restores after that because I can’t uninstall it.
I want to play the game. What do I do?
What is your pc spec’s?
Specs are:
Q6600 2.4ghz core 2 quad
4 gig RAM, although Vista detects only 3
9800 GT gpu
P6 SLI mobo.
Any help would be greatly appreciated.
When Vista only detects 3gb ram. I assume that u havent installed SP1 and SP2 (SP = Service Pack). It might help, as it helped me with Arma 2. So i reccomend that u install those.
Oooohhh! Okay, I’ll give it a shot! Thank you very much!
hi ive got a problem after fighting the Venom Punk and his 25 goons or so and my objective is Stop Joker from Polluting Gotham River and i finished till now now about 51% from the game, however there is no indication of where to go on the map, there are absolutely no NPC’s except deceased NPC’s and certain areas have invisible walls, then i tried to enter the botanical gardens but i faced the same invisible wall problem,so iam stuck here and cant continue the game. so if there any solutions or fixes please reply as fast as you can people please…
hi guys,when I tried to update batman to 1.1 it will pop a window saying that it couldn’t find Batman Arkham Asylum Game and now setup will close.Any having this issue?Help!
when i start bmstartapp i get an error “seculauncher failed to start the application[9000]
the game cant be installed…when i install d game shows : 1 or more files is missing…..what shud i DO ??
Hello there.To the people having problems such as freezing and crashes,I may have the solutions.For those who freeze during loading,it means that the next area’s file doesn’t exist in ur comp.For those who encounter invisible walls,they probably have bugs in the game.Sorry to say but I cannot recommend any good crack websites ‘coz I never tried them before.For those who keeps getting crashes have to download saved files which has already progressed further.WARNING:You could miss a few stuff.If ur lucky,u’ll find some saved files on the net or u could copy from ur friends(that is if they have em)
Well that’s all I could say.Good luck to u all….
As for me,I am just waiting for it to finish installing the game.Just bought it.Wish me luck.
Cheers….=)
i just bought the game and it installed fine it even started well i go on with joker through the corridors and then suddenly the whole game goes haywire and the game resumes with batman surrounded by enemies and joker has already escaped how ??? why ??? when thi also repeats afterwards and the game just skips the movies
PLEASE HELP……
Where to start…. hangs randomly during installation, hangs when installation complete and “trying to install software required to run batman…”?
Fingerprint error once or twice, but stuck on general protection fault now.
Installing on 32bit windows seven ultimate, new boxed version. GPU – 4870×2. Batman is boxed version not D2D.
hi.
i had the exact same problem like Hameed’s. i tried many programs to delete the whole program but didnt worked, one of em removed BAA from the uninstall list. so i cant use total uninstall or programs that guys suggested here. still the install option is inactive, and i cant find any trace of BAA on my pc, plz help.
Hi, I also have a problem with Batman not giving the option on some places in the game were I need to grappel to a higher area. The game just not open the option to press (f) and shoot is rope to climb up! it once helped me to restart the game from the beginning, but I am about 35% into the game and for sure don’t want to start the game from the beginning again! Thanks
Movement glitch
If I press CTRL+Spacebar,then the WASD keys have no effect: Batman will just stand still and my computer will beep if I press the keys.
I have contacted Eidos about this. I guess they’ll get back to me.
Has any else experienced this kind of problem?
hey..i just downloaded and installed batman AA..after instaling the game..when i press the PLAY button,the computer asks me:
AN ACTIVATION CODE IS REQUIRED TO CONTINUE..
kan sombdy plz help me out with the code!!!
I have a problem here. I just reformatted my PC. And i install back Batman game. I have a problem that is, the game seemed to lag compared to last time. my pc meet the system requirement of this game. Last time i can play it quite smoothly. Right now, whenever i quit the game. The game just hang… and my screen turns black, the music continues playing. The system seemed to be hang.. and i have to restart it again and again. Someone please help.
my problem is almost like notalker…in the same level but at a different stage…after i enter scarecrow’s world..after crossing three or four walls the game crashes..i get stuck as i can’t get forward! could someone send me their saved files or give a solution?
i can’t play batman AA, when i start it, application error….click ok to terminate application….and i re-install it….and still doesn’t work…then i reformat my pc then still no luck…pls hlp me…
i already finished until 51% (like yehia’s problem) i can’t found platform to grapple (like petrus’s problem) after i reach 2nd batcave….. i just wondering,so please give me solution….
stop joker from polluting gotham river,is my objective and im stuck at this i hav no clue wer to go,there is no map showing any points,everyone is dead and there is nothing to do at this point im at 51% ,almost in the middle and it leads me nowhere.
i am trying to install the 1.1 patch. after downloading, extracting and running setup.exe it starts the install shield where it tells me it will update batman. i click next. an error box appears telling me i am about to install nvida’s physX software and it warns me that dedicated hware is needed when its enabled. i click OK when another error box appears stating that there is not enough space to install these options. there is over 500gb free on my hdd.
running win 7 32bit, gtx 295, 4gb ram.
any help would be appreciated.
thanks
i failed to mention the latest physX drivers are already installed and setup quits after the above error so the patch cannot be applied and not anywhere does it allow me to enter any details like storage device / pathways. could it be a corrupt setup file?
thanks in advance
hello fridends.I have a problem of BAA game.I reached 8% of the game and when i killed bane then it crashed every times.reinstalling did’t fix it.Please anyone help me.
hello friends.I have a problem of BAA game.I reached 8% of the game and when i killed bane then it crashed every times.reinstalling did’t fix it.Please anyone help me.
ah game kontol banyak amat bug nya jing
I have two problems
a. everytime i Press CTRL+SPACEBAR, Keyboard freezes and no other keys operates. Is there a patch or a solution to this?
b. Many Riddler items are behind walls that are at a height. I need to blast these walls but BATMAN cannot climb to that height. How to i do this?
A.DON’T PRESS IT MILAN.
B.COME SOME FAR FROM THE WALL AND PUT THE MOUSE IN THE UPPER SIDE OF THE WALL.THEN PRESS F.THEN BATMAN WILL GO THERE.
I can’t get on top after falling down in battle with scarecrow.there is no options for grapple up.?
Please E-mail me the solution at molik_garg@yahoo.co.in
Thanks In Advance.
when i start bmstartapp i get an error “seculauncher failed to start the application[9000]
when i start game i get general protection fault error
Sound on movies and no sound in game. got put sound hardware acceleration on basic and it runs good. pain I hope edios will fix this
when i complete 26 percent of baa the game kicks me out to the desktop
Hi…everyone i have problem with BAA, after installing and launch the game i have ERROR it’s say:
BmLauncher.exe-application error
the application failed to initialize properly(0xc000007b).
i try re-installing the game and update all driver but still
error.
my specs
mcp55 gygabite
athlon x2 3800
2 gb ram
ati radeon pro x1650 256mb
pleeeeaaaaseeee everyone i need helppp???????
How do i fix the game cus i have no idea
hey frnds………..my game crashes when batman is jst abt to entr the batcave on arakham island……nthng happens aftr the cutscene when he jumps from the cliff nd cms in frnt of batcave………only the game music keeps on playing….how can it b fixd…..
pzzzzzzzzzzzzzzzzz.,.,.,.,.,i really neeeeeeeed help….
hey frnds………..my game crashes when batman is jst abt to entr the batcave on arakham island……nthng happens aftr the cutscene when he jumps from the cliff nd cms in frnt of batcave………only the game music keeps on playing….how can it b fixd…..
pzzzzzzzzzzzzzzzzz.,.,.,.,.,i really neeeeeeeed help….
plzzzz email the sollution at rameshrana03@gmail.co.in
ok i have instaled BAA but i have the problem that i cant throw the rope to the vent in high places every time…some times it works but when i need to go to the dr.young’s office it wont grapple..what do i need to dooooooo!!!!!!????
hey! i play game with windown xp but it not sound in game,please help meeeeeeeeee!!!
(
when i run d setupits showin as not enuf disk space bt am havin 15gb space.. wat shud i do?
fingerprint error 0
When I try to install batman A.A. it only says Install DirectX play game Game Setup and Quit But when I pick Play game it syas Specific file not found and the install button can’t be pushed……….. PLS help right away
I got the official game a few months ago, when the installation process crashes. so i accidentally quit it. now my computer thinks that it is installed, though when you press play game, settings, it comes up with ’specific file was not found.’ my computer windows is windows xp.
Please help me, i need it right away.
Problem with the Grappling Hook Don’t Get It In The Right Places & Sends U Out Of The Game On A Brick In The Middle Of Nowhere Fail Graphics!! Or Error??
i have installed batman arkham asyluum successfully but when i try to launch the game through its icon on desktop it says wrong disk inserted please insert the original batman arkham asylum cd dvd please have look at http://www.securom.com/message.asp?m=wrongdisk for further more detailed information
i have installed batman arkham asyluum successfully but when i try to launch the game through its icon on desktop it says wrong disk inserted please insert the original batman arkham aslum original dvd cd
Try putting in a crack and see if it helps.
Go to http://www.megagames.com and click on the one that says PC Fixes, and from there i thing you’ll manage.
“seculauncher:failed to start application . [2000]->00000000×2” when i try 2 run the game tis is the error message pls help me